Design and Implementation of an IoT-Based Air Pressure Monitoring and Automatic Data Logging System for Industrial Compressors

Authors

DOI:

https://doi.org/10.17509/jmai.v4i1.147

Keywords:

IoT, ESP32, Pressure Sensor, Google Sheets, Compressor Monitoring

Abstract

Compressor systems play an important role in supporting industrial production processes because they provide compressed air for various pneumatic equipment. At PT Dahana, compressor pressure monitoring was still performed manually, making it difficult to obtain historical data for performance evaluation and preventive maintenance. This study aims to design an Internet of Things (IoT) based air pressure monitoring system equipped with automatic data recording. The proposed system utilizes an ESP32 microcontroller, SKU237545 pressure sensor, Wi-Fi communication, Google Apps Script, and Google Sheets as cloud-based data storage. The pressure sensor measures compressor air pressure and transmits data through the ESP32 to Google Sheets in real time. System testing was conducted on three compressors located in the workshop area, Elemented Factory, and Cartridge Emulsion Factory. The measured parameters include pressure values, differences between sensor readings and pressure gauge measurements, and percentage error. The results show that the developed system successfully performs real-time monitoring and automatic data logging. The pressure measurements obtained from the sensor show a relatively small error compared to the reference pressure gauge, indicating that the system can be utilized as a reliable monitoring solution. The implementation of this system supports preventive maintenance activities and improves operational efficiency in industrial compressor monitoring.

Downloads

Download data is not yet available.

Author Biographies

  • Maudynar, Nusa Putra University

    Electrical Engineering Department

  • Fikri Arif Wicaksana, Nusa Putra University

    Electrical Engineering Department

References

[1] D. Gryboś and J. Leszczyński, “Exergy analysis of pressure reduction, back pressure and intermittent air supply configuration of utilization/expansion stage in compressed air systems,” Energy, vol. 285, p. 129419, 2023, doi: https://doi.org/10.1016/j.energy.2023.129419.

[2] I. K. Priyanto, M. E. R. Ramadhan, F. P. L. Gojandra, and N. Kurniadi, POMPA DAN KOMPRESOR. Alungcipta, 2025.

[3] S. N. Swamy and S. R. Kota, “An empirical study on system level aspects of Internet of Things (IoT),” IEEe Access, vol. 8, pp. 188082–188134, 2020.

[4] A. Rahayu, “Metode penelitian dan pengembangan (R&D): Pengertian, jenis dan tahapan,” DIAJAR: Jurnal Pendidikan Dan Pembelajaran, vol. 4, no. 3, pp. 459–470, 2025.

[5] M. Waruwu, “Metode penelitian dan pengembangan (R&D): konsep, jenis, tahapan dan kelebihan,” Jurnal Ilmiah Profesi Pendidikan, vol. 9, no. 2, pp. 1220–1230, 2024.

[6] M. I. Amin and A. Wisaksono, “Google Sheet Based Air Dryer Compressor Monitoring System: Sistem Pemantauan Kompresor Pengering Udara Berbasis Google Sheets,” Indonesian Journal of Innovation Studies, vol. 26, no. 3, pp. 10–21070, 2025.

[7] H. Alfarizi and R. Z. Abidin, “Sistem Monitoring Suhu Berbasis IoT dengan Sensor Thermocouple dan Pelaporan Otomatis Menggunakan Google Sheets pada Ruang Cold Storage,” JATI (Jurnal Mahasiswa Teknik Informatika), vol. 9, no. 6, pp. 9212–9218, 2025.

[8] D. S. Serra, A. J. C. Ribeiro, T. A. dos Santos, F. S. Á. Cavalcante, and M. L. M. de Oliveira, “Prototype for measuring air flow in pipes using ultrasonic sensors for exhaust gas velocities,” Sens. Actuators A Phys., vol. 393, p. 116829, 2025, doi: https://doi.org/10.1016/j.sna.2025.116829.

[9] B. Aryani and M. R. Tsani, “Pengembangan Sistem Pendeteksi Tekanan Ban Berbasis Internet of Things untuk Otomatisasi Inspeksi Kendaraan,” Infotekmesin, vol. 16, no. 2, pp. 417–424, 2025.

[10] N. A. U, S. Pujiyati, T. Hestirianoto, A. Rahmat, J. Santosa, and K. N. Nadya, “The Journal of Academic Science Design of Gas Pressure and pH Pressure Monitoring and Control System using ESP32 on IoT-Based Biogas Digester,” vol. 2, no. 5, pp. 5–10, 2025.

Downloads

Published

2026-12-15